Operators use dallas key-style fobs to disable the immobiliser and start the vehicle.Automatically immobilises ignition and starter motor 30 seconds after the ignition is turned Off.Supplied with two dallas keys.LED status indicator.Thatcham 2 approved.Should be installed by an accredited engineer to fulfil Thatcham approval.
Protects your vehicle against unauthorised useAfter its installation, the immobilizer is fully integrated and cannot be recognized by unauthorized personsThe electronic key makes use of contact-free transponder technologyThe transponder (sender and receiver unit)has its own battery-free power supply and is permanently integrated into the mechanical key of the start switchRecovery of a stolen vehicle leads to economic loss and long downtimes. An immobilizer can make theft more difficult.
A8510 Key ProgramingEnsure the immobiliser is disarmed :-1) Switch the ignition ON and OFF three times then back to the ON position within seven seconds.2) The LED on the dashboard will light up signaling the unit is in programming mode.3) Touch an already programmed key onto receptical, the LED will extinguish for one second4) Repeat step 3 for all other keys (Max of 4 touch keys)5) To exit programming switch off the ignition key (unit will automatically exit programming after four keys)NOTE :-1) Programing procedure can only entered with the system disarmed.2) If all keys have been lost the system will need to be replaced
