Moldex Foam Ear Plugs (One Pair - disposable). Comfortable PU foam earplugs to protect against long-term exposure. Plugs made from a soft material that is easy to insert. SNR 34dB. EN 352-2:1992
Clear acrylic displayScreen printed logo to one side5 x aluminium nose pieces (removable)Width: 200mmDepth: 1100mmHeight: 500mmDisplay Stand Only, Glasses sold separately
Used for absorbing most fluids.Supplied in a roll and contained in a dispenser box.Roll is perforated in all directions, allowing separation into the required sheet size.
Moldex Foam Ear Plugs. Comfortable PU foam earplugs to protect against long-term exposure. Plugs made from a soft material that is easy to insert. SNR 27dB. EN 352-2:2002
Moldex Foam Ear Plugs (Five Pairs - disposable). Comfortable PU foam earplugs to protect against long-term exposure. Plugs made from a soft material that is easy to insert. SNR 27dB. EN 352-2:2002
Protects against:Very fine dusts and spores.Farmer's lung.Mushroom workman's lung.Water based crop sprays except those:a. used indoors.b. applied by aerosols.c. where respirator is likely to become saturated.NB. Not for use with Part 1 Specified Substances.
BS 2092 1CDMProvides full eye protection against chemical splash, dust and molten metal hazards.Special ventilation slits prevent dust and small particles entering.
Protects against:Very fine dusts and spores.Farmer's lung.Mushroom workman's lung.Water based crop sprays except those:a. used indoors.b. applied by aerosols.c. where respirator is likely to become saturated.NB. Not for use with Part 1 Specified Substances.
FeaturesFACEPIECE Having a more concave shape offers longer duration and lower breathing resistance. The sealing edge has small holes that reduce internal heat and humidity.NOSE CLIP Internal, placed between two layers of fabric so as to reduce the exposed metal parts to a minimum.AVAILABLE WITH ADJUSTABLE ELASTICS Allow having a custom fit. The textile fibres let the skin breathe and don't rub the hair.AVAILABLE WITH ACTIVATED CARBON An activated carbon layer is added to the respirator to protect from nuisance odours caused by gases and vapours, both organic and acidic, and ozone in concentrations below the threshold limit value (TLV).
FeaturesANATOMIC The pre-formed and elastic support makes an easier and reliable fit to all kinds of faces. It offers an excellent visual field and great compatibility with glasses.EOLO® EXHALATION VALVE An ultralight membrane concentrates the exhaled air into two zones of maximum aperture, 30% wider than before. With these improvements breathing resistance decreases significantly.ARMOR® LAYER It is an external protective layer that ensures the protection of the filtering material from dirt, dust and liquids as well as the normal mechanical stress due to prolonged use thus extending and preserving filtering efficiency and making the device safer.GASKET Made with a new soft technical foam, which allows an excellent fit on any face and guarantees a high comfort on contact with the skin.AVAILABLE WITH ACTIVATED CARBON An activated carbon layer may be added to the respirator to protect from nuisance odors caused by gases and vapors, both organic and acidic, including ozone (ideal for welding operations), in concentrations below the threshold limit value (TLV).IT BREATHES! The ratio of transmission of water vapour through the material is 4500 g/m² * 24hrs. A value that defines materials of a high transpiration range which makes it ideal for hard physical work.
FeaturesANATOMIC The pre-formed and elastic support makes an easier and reliable fit to all kinds of faces. It offers an excellent visual field and great compatibility with glasses.EOLO® EXHALATION VALVE An ultralight membrane concentrates the exhaled air into two zones of maximum aperture, 30% wider than before. With these improvements breathing resistance decreases significantly.ARMOR® LAYER It is an external protective layer that ensures the protection of the filtering material from dirt, dust and liquids as well as the normal mechanical stress due to prolonged use thus extending and preserving filtering efficiency and making the device safer.GASKET Made with a new soft technical foam, which allows an excellent fit on any face and guarantees a high comfort on contact with the skin.AVAILABLE WITH ACTIVATED CARBON An activated carbon layer may be added to the respirator to protect from nuisance odors caused by gases and vapors, both organic and acidic, including ozone (ideal for welding operations), in concentrations below the threshold limit value (TLV).IT BREATHES! The ratio of transmission of water vapour through the material is 4500 g/m² * 24hrs. A value that defines materials of a high transpiration range which makes it ideal for hard physical work.
Chemical protection glove, 0,7* mm (*chem-layer) PVC (Vinyl), interlock, cotton, smooth finish, Cat. III, red, oil and grease resistant, for heavy workPROPERTIES: Very durableFEATURES: Protection against chemicalsPREVENTS RISK OF: Corrosive injuries, contact with moisture, contact with oil and fatPRIMARY ENVIRONMENTS OF USE: Chemical risk environments, microbiological risk environments, environments hazardous to health, corrosive environments, wet environments, moist environments, oily and greasy environments, harsh environmentsPRIMARY AREAS OF USE: Building and construction, HVAC installation, construction, soil preparation, concrete work, mining, agricultural work, marine work, petro-chemical work, chemical work, chemical technology work, paper industry work, decontamination, sanitationPRIMARY INDUSTRIES OF USE: Agriculture, mining, oil, gas, petrochemical, pulp and paper, chemical, rubber and plastic, metal fabricationTYPE OF WORK: Heavy weight
Chemical protection glove, 0,7* mm (*chem-layer) PVC (Vinyl), interlock, cotton, smooth finish, Cat. III, red, oil and grease resistant, for heavy workPROPERTIES: Very durableFEATURES: Protection against chemicalsPREVENTS RISK OF: Corrosive injuries, contact with moisture, contact with oil and fatPRIMARY ENVIRONMENTS OF USE: Chemical risk environments, microbiological risk environments, environments hazardous to health, corrosive environments, wet environments, moist environments, oily and greasy environments, harsh environmentsPRIMARY AREAS OF USE: Building and construction, HVAC installation, construction, soil preparation, concrete work, mining, agricultural work, marine work, petro-chemical work, chemical work, chemical technology work, paper industry work, decontamination, sanitationPRIMARY INDUSTRIES OF USE: Agriculture, mining, oil, gas, petrochemical, pulp and paper, chemical, rubber and plastic, metal fabricationTYPE OF WORK: Heavy weight
Chemical protection glove, 0,38 mm nitrile, diamond grip pattern, flock-lined, Cat. III, green, latex-free, for allround workPROPERTIES: High level of protection, flexible, comfortableFEATURES: Protection against chemicals, approved for handling foodstuffs, latex-free, oil and grease resistantPREVENTS RISK OF: Risk of infection, corrosive injuries, contact with dirt, contact with chemicals, contact with oil and fatPRIMARY ENVIRONMENTS OF USE: Chemical risk environments, microbiological risk environments, environments hazardous to health, corrosive environments, wet environments, oily and greasy environments, dirty environments, harsh environmentsPRIMARY AREAS OF USE: Painting, agricultural work, chemical work, chemical technology work, laboratory work, paint spraying work, paper industry workPRIMARY INDUSTRIES OF USE: Agriculture, oil, gas, petrochemical, pulp and paper, chemical, rubber and plastic, metal fabrication, facilitiesTYPE OF WORK: Medium weight
Chemical protection glove, 0,38 mm nitrile, diamond grip pattern, flock-lined, Cat. III, green, latex-free, for allround workPROPERTIES: High level of protection, flexible, comfortableFEATURES: Protection against chemicals, approved for handling foodstuffs, latex-free, oil and grease resistantPREVENTS RISK OF: Risk of infection, corrosive injuries, contact with dirt, contact with chemicals, contact with oil and fatPRIMARY ENVIRONMENTS OF USE: Chemical risk environments, microbiological risk environments, environments hazardous to health, corrosive environments, wet environments, oily and greasy environments, dirty environments, harsh environmentsPRIMARY AREAS OF USE: Painting, agricultural work, chemical work, chemical technology work, laboratory work, paint spraying work, paper industry workPRIMARY INDUSTRIES OF USE: Agriculture, oil, gas, petrochemical, pulp and paper, chemical, rubber and plastic, metal fabrication, facilitiesTYPE OF WORK: Medium weight
Chemical protection glove, 0,38 mm nitrile, diamond grip pattern, flock-lined, Cat. III, green, latex-free, for allround workPROPERTIES: High level of protection, flexible, comfortableFEATURES: Protection against chemicals, approved for handling foodstuffs, latex-free, oil and grease resistantPREVENTS RISK OF: Risk of infection, corrosive injuries, contact with dirt, contact with chemicals, contact with oil and fatPRIMARY ENVIRONMENTS OF USE: Chemical risk environments, microbiological risk environments, environments hazardous to health, corrosive environments, wet environments, oily and greasy environments, dirty environments, harsh environmentsPRIMARY AREAS OF USE: Painting, agricultural work, chemical work, chemical technology work, laboratory work, paint spraying work, paper industry workPRIMARY INDUSTRIES OF USE: Agriculture, oil, gas, petrochemical, pulp and paper, chemical, rubber and plastic, metal fabrication, facilitiesTYPE OF WORK: Medium weight
Chemical protection glove, 0,38 mm nitrile, diamond grip pattern, flock-lined, Cat. III, green, latex-free, for allround workPROPERTIES: High level of protection, flexible, comfortableFEATURES: Protection against chemicals, approved for handling foodstuffs, latex-free, oil and grease resistantPREVENTS RISK OF: Risk of infection, corrosive injuries, contact with dirt, contact with chemicals, contact with oil and fatPRIMARY ENVIRONMENTS OF USE: Chemical risk environments, microbiological risk environments, environments hazardous to health, corrosive environments, wet environments, oily and greasy environments, dirty environments, harsh environmentsPRIMARY AREAS OF USE: Painting, agricultural work, chemical work, chemical technology work, laboratory work, paint spraying work, paper industry workPRIMARY INDUSTRIES OF USE: Agriculture, oil, gas, petrochemical, pulp and paper, chemical, rubber and plastic, metal fabrication, facilitiesTYPE OF WORK: Medium weight
Welding and heat-resistant glove, fully lined, 1,2-1,4mm split cowhide of top quality, jersey, Cat. III, yellow, withstands contact heat up to 100°C, reinforced seams, elasticated 180°, for heavy work PROPERTIES: High level of protection, good fingertip sensitivity, very durable, good fitFEATURES: Withstands contact heat up to 100°C, reinforced seams, flame retardant, withstands welding sparks and grinding splashPREVENTS RISK OF: Burn injuries, heat injuries, abrasion injuries, blisters, grazes, scratches, lacerationsPRIMARY ENVIRONMENTS OF USE: Warm environments, harsh environmentsPRIMARY AREAS OF USE: Engineering, hot work, miningPRIMARY INDUSTRIES OF USE: Mining, metal fabrication, automotiveTYPE OF WORK: Heavy weight
Welding and heat-resistant glove, fully lined, 1,2-1,4mm split cowhide of top quality, jersey, Cat. III, yellow, withstands contact heat up to 100°C, reinforced seams, elasticated 180°, for heavy work PROPERTIES: High level of protection, good fingertip sensitivity, very durable, good fitFEATURES: Withstands contact heat up to 100°C, reinforced seams, flame retardant, withstands welding sparks and grinding splashPREVENTS RISK OF: Burn injuries, heat injuries, abrasion injuries, blisters, grazes, scratches, lacerationsPRIMARY ENVIRONMENTS OF USE: Warm environments, harsh environmentsPRIMARY AREAS OF USE: Engineering, hot work, miningPRIMARY INDUSTRIES OF USE: Mining, metal fabrication, automotiveTYPE OF WORK: Heavy weight
Welding and heat-resistant glove, fully lined, 1,2-1,4mm split cowhide of top quality, jersey, Cat. III, yellow, withstands contact heat up to 100°C, reinforced seams, elasticated 180°, for heavy work PROPERTIES: High level of protection, good fingertip sensitivity, very durable, good fitFEATURES: Withstands contact heat up to 100°C, reinforced seams, flame retardant, withstands welding sparks and grinding splashPREVENTS RISK OF: Burn injuries, heat injuries, abrasion injuries, blisters, grazes, scratches, lacerationsPRIMARY ENVIRONMENTS OF USE: Warm environments, harsh environmentsPRIMARY AREAS OF USE: Engineering, hot work, miningPRIMARY INDUSTRIES OF USE: Mining, metal fabrication, automotiveTYPE OF WORK: Heavy weight
Leather glove, half-lined, 1,2 - 1,4 mm split cowhide, cotton, jersey, Cat. II, yellow, grey, reinforced index finger, reinforced fingers and thumb, elasticated 180°, for heavy workPROPERTIES: High level of protectionFEATURES: Reinforced index finger, reinforced fingers and thumbPREVENTS RISK OF: Abrasion injuries, blisters, grazes, scratches, lacerations, contact with dirtPRIMARY ENVIRONMENTS OF USE: Harsh environmentsPRIMARY AREAS OF USE: Engineering, transport work, miningPRIMARY INDUSTRIES OF USE: Automotive, transportationTYPE OF WORK: Heavy weight